solidThinking Inspire 2016 Webinar Series

Ready to master a new skill or get started Inspire ?

No matter what your experience level is, our technical experts have a webinar for you. Register for one of our upcoming sessions below or view a recording at the bottom of the page. 

 


Recorded Sessions 

Loads in solidThinking Inspire - View The Recording 

Date: September 29th, 2016
Time: 10 AM EDT
Presenter: Pietro Bellogi, Application Engineer 

In this webinar you will discover all the different types of loads that can be used in Inspire.You will also learn how loads can affect shapes. Some tips and hints will help you prevent some typical mistakes.

In this webinar you will learn about: 

  • Overview of loads
  • How loads affect results
  • Tips and hints

View the Recording

Loads_in_Inspire.png

Rib Design Improvement for Cast Parts with solidThinking Inspire - View the Recording

Date: September 15th, 2016
Time: 10 AM EST
Presenter: Felix Radisch, Application Engineer

In this Webinar you will learn how to run a baseline analysis of a casted part in order to create a better ribs design with multiple optimization steps.

In this webinar you will learn about: 

  • Why a baseline analysis is needed to improve your design
  • Why a Topology Optimization should be run in multiple steps
  • How to run multiple optimizations in a row

View the Recording


 

Felixs_webinar.jpg 


Using Contacts in Assemblies with solidThinking Inspire - View the Recording

Date: September 1st, 2016
Time: 10 AM EST
Presenter: Pietro Bellogi, Application Engineer

This webinar will help you understand the basics of contacts and how to design parts within assemblies. The use of contacts will allow you to apply more realistic loading conditions. Some tips and hints about contacts will also help you find new ways of solving some typical design problems.

In this webinar you will learn about: 

  • Defining supports
  • Connecting Parts
  • Displaying Results
  • Viewing Images
View the Recording

Inspire_for_contacts.png

 


solidThinking Inspire for 2D Surface Applications - View the Recording

Date: August 18th, 2016
Time: 10 AM EDT
Presenter: Farbod Gharaei, Application Engineer

Inspire offers a variety of tools to analyze and optimize 2D surfaces.
This webinar focuses on how to efficiently use these tools (i.e. Topography Optimization, Midsurface Tool, etc) to get the best results.

In this webinar you will learn about: 

  • Topology Optimization of 2D surfaces
  • Topography Optimization of 2D surfaces
  • Analysis of 2D Surfaces
View the Recording
Inspire_for_2D_surfaces.png

solidThinking Inspire for Finite Element Analysis - View the Recording

Date: August 4th, 2016
Time: 10 AM EST
Presenter: Matthieu Pupat, Customer Support Manager 

Are you looking to quickly check your parts before sending them out for validation? Inspire can help you. Attend this webinar to learn how to take benefit from all Inspire analysis capabilities.

In this webinar you will learn about: 

  • Defining supports
  • Connecting Parts
  • Displaying Results
  • Viewing Images
View the Recording
Inspire_for_FEA.png